Use a Solar Water Heater to save on your bills
P>To get the sun to heat your water as in a solar water heater. You would first need a collector placed on or built into the roof of your home, or on a wall facing the sun, or it could be be free-standing.
The collector can be a simple glass topped box with copper pipes in it, or a set of metal tubes surrounded by a evacuated (near vacuum) glass cylinder. A parabolic mirror can also be added to concentrate the sun's light on the tube. They are usually black inside to further help with heating the water
A simple water heating system would pump cold water out to a collector to be heated, the heated water flows back to a collection tank. This type of collector can provide enough hot water for a family, for very little or no monthly cost.
The hot water could then be stored in a hot water tank. The volume of this tank will be larger with solar heating systems in order to allow for bad weather.
The working fluid for the absorber may be the hot water from the tank, but more usually at least in pumped systems will be a separate loop of fluid continuing anti-freeze and a corrosion inhibitor which delivers heat to the tank through a heat exchanger - a coil of copper tubing within the tank.
If a central heating system is also present and heats water then either the solar heat will be concentrated in a pre-heating tank that feeds into the tank heated by the central heating, or the solar heat exchanger will be lower in the tank than the hotter one.
The water from the collector can reach very high temperatures in good sunshine, or if the pump fails. Designs should allow for relief of pressure.
Other articles that may be of interest to you include
Solar Heating and Solar Home.
|
